Proses Penjerukan Tiub Kuarza

The quartz tube pickling process is a common surface treatment method primarily used to remove oxides and impurities from the surface of quartz tubes, enhancing their surface smoothness and corrosion resistance. Below are the general steps of the quartz tube pickling process:

Check the quality of the quartz tubes to ensure their surfaces are free of cracks, pores, and other defects. Then, place the quartz tubes into the pickling tank.

Pour the pickling solution into the tank, ensuring the quartz tubes are completely submerged in the acid. Common pickling solutions include hydrofluoric acid and sulfuric acid. Select the appropriate pickling solution and treatment time based on the requirements.

After pickling, remove the quartz tubes and rinse them thoroughly with clean water. Be careful not to damage the surface of the quartz tubes during washing.

Selepas mencuci, periksa sama ada permukaan tiub kuarza licin dan bebas daripada oksida dan kekotoran. Jika keputusan rawatan tidak memuaskan, penjerukan kedua atau rawatan tambahan mungkin diperlukan.

Place the cleaned quartz tubes on a drying rack to air dry, or wipe them clean with a clean cloth before proceeding to the next steps.

Adalah penting untuk ambil perhatian bahawa proses penjerukan memerlukan kawalan ketat terhadap pelbagai parameter seperti kepekatan larutan penjerukan, suhu, dan masa rawatan untuk memastikan rawatan yang berkesan dan mengekalkan kualiti tiub kuarza. Selain itu, pengendali hendaklah memakai peralatan perlindungan seperti cermin mata keselamatan dan sarung tangan kalis asid untuk memastikan keselamatan.

For more information about our advanced surface treatment technologies and quartz products, please visit Global Quartz Tube at www.globalquartztube.com. You can also reach us via email at contact@globalquartztube.com for inquiries and further assistance.