Proces kiseljenja kvarcnih cijevi

The quartz tube pickling process is a common surface treatment method primarily used to remove oxides and impurities from the surface of quartz tubes, enhancing their surface smoothness and corrosion resistance. Below are the general steps of the quartz tube pickling process:

Check the quality of the quartz tubes to ensure their surfaces are free of cracks, pores, and other defects. Then, place the quartz tubes into the pickling tank.

Pour the pickling solution into the tank, ensuring the quartz tubes are completely submerged in the acid. Common pickling solutions include hydrofluoric acid and sulfuric acid. Select the appropriate pickling solution and treatment time based on the requirements.

After pickling, remove the quartz tubes and rinse them thoroughly with clean water. Be careful not to damage the surface of the quartz tubes during washing.

Nakon pranja provjerite da li je površina kvarcnih cijevi glatka i bez oksida i nečistoća. Ako su rezultati tretmana nezadovoljavajući, može biti potrebno drugo kiseljenje ili dodatni tretman.

Place the cleaned quartz tubes on a drying rack to air dry, or wipe them clean with a clean cloth before proceeding to the next steps.

Važno je napomenuti da proces kiseljenja zahteva strogu kontrolu različitih parametara kao što su koncentracija rastvora za kiseljenje, temperatura i vreme tretmana kako bi se obezbedio efikasan tretman i održao kvalitet kvarcnih cevi. Osim toga, operateri bi trebali nositi zaštitnu opremu kao što su zaštitne naočale i rukavice otporne na kiseline kako bi osigurali sigurnost.

For more information about our advanced surface treatment technologies and quartz products, please visit Global Quartz Tube at www.globalquartztube.com. You can also reach us via email at contact@globalquartztube.com for inquiries and further assistance.